Tuesday, July 14, 2015

Work Log: Princess of the Crystal (Mawaru Penguindrum) #3

Today I made the skirt of this cosplay.  After a lot of thinking I realized it's just a long circle skirt.  My measurements from my natural waist to floor, while wearing the bustle cage and my heels is 47".  I'm measuring at my natural waist, instead of where I usually measure, because the top of the skirt will be hidden by the bodice.

The hardest part of this was cutting it out and the long seams.  (I hate long seams because I get so bored, lol).  I had to tape 6 pieces of my large graph paper together and get my DH's help to draw the pattern, then instead of using the quarter-sized pattern, I folded that in half so that my pattern was an eighth, meaning it would take 8 pieces using that pattern to make the skirt.


I cut the pattern out 6 times in the red fabric and 6 times in the black.  6 pieces, because it's open front so I didn't need to make a fully round skirt.  The fabric I used for this is just quilter's cotton. The black was the cheapest black that I could find and the red was the one that I thought was the best color choice.  I sewed the red skirt together first and ended up only using 5 pattern pieces and that fit me exactly the way I wanted it to. It was probably my typical bad measuring that made the pieces big enough for that, lol.  I didn't finish the edges because I already had a plan for that.

Before putting the black together I made the ruffles.  These are also made from cheap quilter's cotton.  I cut the fabric to the length I needed (with 1/2" seam allowance) and double the height so that I could fold it in half and not have to worry about hemming the exposed edge.  I made 4 sets of 4" pleated ruffles.

When I sewed the 5 black pattern pieces together, I sewed one ruffle between pieces 2 and 3 and then another between pieces 3 and 4 so that they are evenly spaced in the back.  For the front two ruffles I pinned the completed red and black sections right sides together and sandwiched the ruffles on the inside, and sewed the sides and the bottom, leaving the top (waist) open.  Once everything was sewed in place I flipped the skirt right sides out. Now it's hemmed and I only have raw edges at the top.

For the waist band I made a tube that is 1.75" tall and fits around my hips comfortably.  I closed of the top 1.25" of the tube to make a casing for the elastic.  I inserted a piece of elastic small enough that it would hold on my waist, but stretchy enough so that I could pull it over my hips, then using the remaining 1/2" of the waistband I attached it to the skirt.  The front 10" of the waist band don't have any skirt attached. I then used my serger to finish the raw edges at the top of the skirt and on the waistband.  You could also use a zigzag stitch.


 After trying the skirt on, it is the perfect length and very comfortable because the cotton is so light.  I don't know what I'll work on tomorrow yet, but it'll probably be the hat.

Happy Cosplaying!

Monday, July 13, 2015

Work Log: Princess of the Crystal (Mawaru Penguindrum) #2



Today I made the scarf and armwarmers for this cosplay and started the bustle cage for the skirt. 

The scarf was very easy since it's just a purple tube stuffed with some polyfill.  I added snaps to the front so that I could put it around my neck instead of trying to figure out how to get it over my big head, lol.  The pink scarf is just a rectangle that I sewed together, flipped right side out and then closed the hole.  It just gets tied on.  Her purple neckwarmer, has what I took to be more eyelet attached around it.  I used the same eyelet that's on the bodice by just sewing it into the seam as I sewed the purple part into a tube that I then flipped right side out and filled.



The armwarmers are really basic.  I ended up making 3 trials before I made one I liked.  They're made out of stretch nylon, it's basically swimwear/dancewear material that has a 4-way stretch.  I cut the fabric to the exact width of my arm so that when I sewed it with a 1/2" seam allowance it would stretch and fit my arm without elastic.  For the tube length I measured about 1" down onto my hand, then added on a triangle for the finger part and hand sewed in a piece of 1/8" elastic for the fingerloop.



For the bustle cage I used this Bustle Cage tutorial that I found on Pinterest. I used 1/4" pex pipe that I got from Home Depot and red Duck tape because I want it to camouflage with the inside of my skirt which will be red. I also added a second row of pipe in the middle of the cage.  The pex pipe was pretty flexible but didn't really hold it's shape, so my DH later warmed it with a heat gun and gave it a little more roundness.  This was a little time-consuming to get right, but I wanted to have that done so I can put it on when I measure for the skirt.

Tomorrow I'll sew her open-front ball gown skirt and hopefully finish it tomorrow.

Happy Cosplaying!!


Saturday, July 11, 2015

Work Log: Princess of the Crystal (Mawaru Penguindrum) #1

Yesterday I started and finished the bodice for my Princess of the Crystal cosplay for Otakon.  I'm super shocked that I managed to complete it in one day.


The day before, I spent the day making samples and doing trial and error with muslin.  I started with a cheap Strapless Top pattern from Etsy during my research.  I made one out of muslin in my suggested size and it fit perfectly, but was shorter in the front that I wanted, so for my final product I just added 3 inches to the front.

The next step was the figure out how to add the points to the front (and back).  I made sample after sample, never quite getting them to fit correctly.  It would look good, but because I was just making the top longer, there wasn't any flare to accommodate my hips.  Then I had the epiphany that I could just modify a peplum and everything fell into place.

I used the How to Sew a Peplum tutorial from It's Always Autumn that I already had pinned on Pinterest and voilĂ  my pattern was complete.  So I started yesterday afternoon and by the end of the night I had completed the top.

I used 1/2" gold metallic bias tape for the gold trim, the bottom white trim is eyelet trim and the white lines across the front are 1/4" twill tape. I have to go back to Hancock a buy two more buttons for the bottom row, because I thought I already had two, but didn't.  I am however, done!

Next I'll be working on the black armwarmers and the puffy white cuffs she has on. I'm sort of procrastinating to avoid figuring out the skirt, but I'll most likely start that tomorrow. I have an idea for making the skirt puff out like hers, but I'll get to that in another post.

Happy Cosplaying!!

Tuesday, July 7, 2015

Work Log: Esdeath (Akame Ga Kill) #4

 
So, due to unforeseen circumstances (e.g. basically people requiring me to do things for them unexpectedly), it took me longer to finish Esdeath's belt and hat than I wanted.  I am, however, finished and think I did a pretty good job.


 For the belt, I just bought 1 1/2" leather strapping from the fabric store. The cross is craft foam that I cut, sealed with Plasti-Dip and then painted.  It's a black cross on top of a silver cross.  The ends of the belt are covered with silver stretch polyester, and then the belt and cross are joined by a piece of felt in the back.






For the hat, instead of making a hat from scratch, I bought a black military style hat from Amazon.  "Why black?", you ask.  Black so that the part of the rim that was left sticking out would be black as it is supposed to be.



I measured the top portion, and the circumference of the hat, and sewed it on to cover the hat.  The front black portion is faux leather, cut to shape and then trimmed with bias tape.  I already had the chain leftover from a previous project, and just hand-sewed that on.  I think the hat turned out really well and I'm super excited to wear it.


I don't have a picture of the thigh highs because I'm still not happy with the way they turned out.  Trying to sew on the black "collar" portion has been difficult.  I'm able to do it, but I don't like the way they turn out and am worried that they won't stay up at the con.  I'm going to try just making the "collar" separately, then simply attaching it with double sided tape instead of sewing it on.  That way the thigh high will maintain it's own stretchiness.  Then I'll just have to hand-sew the Xs on.  When I do that, I'll take pics and let you know how it turned out.

Now that I'm basically done with Esdeath, I'm going to start working on The Princess of the Crystal, from Mawaru Penguindrum.  I'm excited about this one because I love outrageous outfits.  Do you??

Happy Cosplaying!



Friday, July 3, 2015

Work Log: Esdeath (Akame Ga Kill) #3


Last night, I made the tassels and cut out the template for the belt buckle.  After trying the tassels on they're like 2-3 inches too long in my opinion, but I probably won't worry about it too much.


I made the collar that holds the tassels 2 inches wide and 16 inches around. My neck circumference is 14", so I added 1" or comfort and then 1" more to accommodate snaps.

In my effort to be accurate I decided the "scarf" portion should stop just a little below my hip line, so I measured to the top of the back pocket on my jeans. From the base of my neck to that line is 25" and I added two more to the top to anchor the tassels securely to the collar. The fur part of the tassels is 21" in length, since Esdeath's are so ridiculously huge, and they're just stuffed with polyester filling. Mine aren't as round and fat as hers are because I didn't want them to be too heavy and after trying them on, they're actually more comfortable than I thought they'd be.

Today I'll hopefully finish everything that's left since I don't have anything else to do today.  I just have to make and attach the belt buckle, make the thigh highs and decorate the hat from Amazon. 

I'm getting so excited about wearing this.

Happy Cosplaying!

Wednesday, July 1, 2015

Work Log: Esdeath (Akame Ga Kill) #2

I didn't get a chance to go to the Hancock Fabrics yesterday, so unfortunately I couldn't get anything accomplished.  Today however, I did have time to make the arm warmers.  I don't want to start her tassels because it's so late.

The arm warmers of course were easy, they're just two tubes, with elastic at the top.  I measured my arm where I wanted them to go and my upper arm is 9 inches around.  The final arm warmer is 10 inches around to allow the fabric to bunch up when I bend my elbow.


Tomorrow I'm going to make the tassels, and hopefully start on the belt buckle.  I don't think I'm going to make the hat from scratch.  I ordered a white hat from Amazon and I will most likely just embellish it to save time.  I have 19 days until Otakon and I haven't even started on my second cosplay.  Gotta love working under pressure, lol.

Happy Cosplaying!

Monday, June 29, 2015

Work Log: Esdeath (Akame Ga Kill) #1

Before I started working on my cosplays for Otakon, I told myself that I would start making work log posts here, but of course as the procrastinator that I am I haven't done it daily like I should.  So... this is going to be a post to catch up, and I'll do it daily from now on :-)



I started with the dress as that is the largest item.  I modified a McCall's pattern #5847(pictured right). This was much easier to put together than my Kirigiri jacket; I was more successful getting the color on the first time.  Because of that, I may try to use more McCall's patterns in the future instead of other brands.
shirt dress pattern.  The directions were quite easy to follow and it was easy to modify. The first modification was to figure out how low the neckline would come and to add on 3.5" to make it a double breasted dress.  I also of course shortened the dress. Next, I figured out that the bottom of the dress has box pleats in a contrasting color, so before I assembled the dress, I added the black between the panels using this simple tutorial that I found on YouTube.

On the inside of the dress there are three small buttons keeping the inside panel from moving and shifting during wear.  Since, her dress has silver buttons on the lapels, I put in snaps to help keep the collar from moving.



Next, I'll be making the arm warmers.  Hopefully I'll have time to at least get that done tomorrow or Wednesday.

Happy Cosplaying!!